The Combine Forum banner

635f header poor feeding.

8379 Views 13 Replies 8 Participants Last post by  jdgreen
We are running a 2013 635f header with air reel and we're doing some field peas. Sometimes the crop will get hung up on the end of the table. The last foot or two. It'll just sit there and build up. No matter where I position the reel, the air, or set my reel speed or travel speed at it'll still do this. Occasionally it'll do it towards the center of the table too. The table is clean on top and underneath. Any ideas on how to fix this?
1 - 2 of 14 Posts
Just finished peas. Laying down, standing up. Didn't find a solution. They didn't go quietly this year.:eek: I broke an astounding amount of those fiberglass auger teeth sucking in those gobs. F
Would have shelled out with a swather. Maybe before the storm that blew them down but then the windrows would be in ND. Or they would still be wet laying there.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.