[dtraxler]

Been having a lot of trouble with the feeder house pluging and not feeding into feeder housefrom auger using a 918 head any help would appicated

 

[southsask9400]

Check the feederhouse slip clutch, it could be getting wore or weak, or a wore feeder house floor could be causing bunching of crop material.

 

[d b farms]

is your drum down?

 

[madcow]

make sure you are on the larger of the two sprockets on the bottom right of the feeder house.

 

[buenymayor]

Are the beans bunching up at the cutter bar and going into the feederhouse in a wad? If so, check the flighting on the auger. if the edges are rounded over, take an angle grinder and grind them square again. That will help a bunch with the the auger grabbing the beans and pulling them evenly into the center.