The Combine Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,357 Posts
should change speed...we're running our feederhouse on the slow pulley but with a 700rpm high idle/no load backshaft speed thats about 640rpm in the field combining. Works very well...the knife rolls arw a little dull though so the stalks are about 4" taller than our new knife rolls were last year.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top