The Combine Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
Has anyone made a 20inch corn head out of a 30inch head. I'm thanking about takin a 6-30 and making a 8-30, any tips.
 

·
Registered
Joined
·
566 Posts
well first of all there are plenty of 8-30 heads out there why screw around with adding more frame to make a 8r30 head. But if you are going to make a 8r20 head than I don't have any tips.
 

·
Registered
Joined
·
80 Posts
i have seen a few 20 inch row heads made from 800 series heads. something to do with the gear boxes on the row unit drives. doesnt work with 900 series heads tho
 

·
Registered
Joined
·
2 Posts
20 inch only works with the 800 series row units and it is alot of work made a 12 row 20 out of a 8 and 4 row much easier just to buy one
 

·
Registered
Joined
·
37 Posts
Go buy a green one already converted, there was two in the MN paper for 6-$8,000. Not much room to work on IH when something goes wrong. Not much resale on 8row20" because they won't be very wide.
 
1 - 5 of 5 Posts
Top