[lostincyberspace]

I read on here a few months back someone was talking about mounting a small pc. of angle iron on the pan behind the straw chopper. what I hope to accomplish is in wet straw we get more straw out the right side of the combine and this would help deflect the straw to both spreaders and distribute more evenly.

 

[tech]

they make a kit that you can put on the right side of the machine to deflect the material to the left side more. and the kit that you can put in is ajustable

 

[8010pilot]

On our 8010 there is a 7'' piece of 1 1/2 angle iron bolted (adjustable) on the pan or plate just behind the chopper blades, about 8" from right side at about a 45 degree angle. Works great, after a bit of adjusting, to spread the straw evenly across stubble behind 24'-30' cut of 90 bu/ac barley. Cheap and easy!! I would post a pic but unsure how to do that on this forum!!??