The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
113 Posts
We run a 643 and a 220 on our 9500. The only issue you might have is if the 643 has been converted to low tin and the vertical frame on the left side of the corn head is right alongside the feeder house opening. It'll need notched pretty deep to clear the reverser gearbox on the 9500. Other than that, you shouldn't have any problems.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top