[fastkrome]

I am having problems with the variable speed drive on my 7700, thought I should start with the hydraulic fluid reservoir. Buuut, can't seem to find it?

Does anybody know where it is? I have looked in my manual and it shows a picture but mine does not have a tank there. Does it come from another source?

Thanks in advance for any help

 

[Guvner21]

Only place I know of is between the platform for the cab and the auger...little door that the tank is bolted to

 

[fastkrome]

Have you ever had a problem with the clutches not moving? Not even sure if I'm barking up the right tree. Just thought start with the fluid as I can hear it trying when I push the lever but the clutch doesn't open and close.

 

[Duane H]

There is a little plastic pop-it valve in the valve spool under the cab there is a metal pin that runs through it some times they come loose on the pin and the variable speed wont work. You can change it out for the reel lift one if your not using that function to see if that's the problem. There will be a plug in the end of the valve they are behind that if I remember right.

 

[fastkrome]

Hey thanks Duane, that was it, just gonna leave it hooked up to the reel hydraulic for now. Change it after harvest.

Thanks again