The Combine Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
11 Posts
I would keep a close eye on the bolts that hold the final drives on the axles. Also check the fan shroud around the cleaning fan. One year mine cracked all the bolt holes and got into the fan, we farm alot of terraced ground the flexing of the machine over time is hard on stuff. Also the frame on the shaker pans will break if the shaker bushing arent watched closely. Check reverser oil daily and also check oil in two speed cylinder drive gearcase regularly.
There is alot of difference between the early 7720's and the Titan II's. The II's will flat eat, we run a 922 and could go to a 925 pretty easily I would say.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top