The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter · #1 ·
Just wondering who makes an after market attachment for the 8010 on the unloading auger that is like the one of the 60 series deeres? don't care for the rubber flap
 

·
Registered
Joined
·
25 Posts
"The Extender" is on our CR 960, and is available for all models. Seen one on 8010 and CR 970 at the Ag Expo in Minot, ND last week. Stewart Steel out of Weyburn, Sask. sells them along with some other things. I believe they come in 3 different lengths of down spouts. It adds 3 feet to the auger, the either a 15" - 36" down spout.

http://www.stewartsteel.com/agparts.html
 

·
Registered
Joined
·
363 Posts
We sell the Calmar extension it goes on the end of your auger and gives you more length. It also has a built in overfow device, also will let grain come out in a nice steady stream. We are in Sask. post back if you want more info
 

·
Registered
Joined
·
2,199 Posts
Check out the above picture. I believe this is the setup you are talking about. The auger was long enough to easily unload on the go while pushing a 40' flex draper. Note that the header in the picture is only a 30' however.

-Lance
 
1 - 6 of 6 Posts
Top