The Combine Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
131 Posts
Discussion Starter #1
Hey all, got a 2005 8010 with groundspeed problems, gears 1-2-3 are good but 4th is dead. Any ideas. I've had some weird things with the ground speed, for a while all we had top speed issues in each gear, had to combine in 3rd just to get 6mph and we could go 13mph in reverse. I found a main ground under the cab that was loose that helped a lot of the problems and after recalibartain everything I cant get 4th to go, valve problem maybe? Thanks!
 

·
Registered
Joined
·
2,233 Posts
there is a switch on back transmission, been some issues with them, pain in the a's to change, don't remember, but i think you can shift manually in to all gears, i would have case look at it, there are measurments that need to be made, scott.
 

·
Registered
Joined
·
236 Posts
check your control pressure,a spungy/weak hydro is the first symptom of low control pressure...should be 310 psi with oil hot and sep.hdr,auger running
 
1 - 4 of 4 Posts
Top