The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
Need some help setting an 08 8010 for 27% corn. Have large wire in front,large skip wire in rear. Concave is on about 3,top sieve on 16,bottom sieve15. Rotor speed 350. Would round bar modules help?We are getting more loss than we like. A lot of green leaf going through, 8 row 30 head,corn running about 210 bpa. Thanks for any suggestions.
 

·
Registered
Joined
·
137 Posts
This is what I would do, take it for what its worth. Two round bar left side, right side skip wire in front round bar in second module. Front vanes in slow, rear ones in middle position. 4 straight bars #3 module, 2 straight bars at the back. Concave 7-10. rotor 400. Won't need that many straight bars once in dry corn. Good luck.
 
1 - 3 of 3 Posts
Top