[azcutter]

A friend of mine running a 8120 is losing corn on the left side of the rotor any suggestions would be helpful 23% moisture 220 bushel @ i do not know what settings he is running says he's tried everything. He did say he is running square grates, does this mean keystock grates TIA

 

[midwest]

Retard the vanes over the grates to slow position. And he needs 3 round bar modules/concaves in it.

 

[gpmci102]

The standard factory setup sucks for corn. You need at least 4 straight bars on the rear of the rotor. This year I put 8 on my 7010 and in 28% corn at 230 bpa I can't find any corn on the ground. I am running an 8 row head. Maybe an 8010 with a 12 row head would only need 4 straight bars. I tried everything with the factory rotor setup and could not get the rotor loss down to what my 2388 could do. The straight bars have a huge rotor loss improvement in corn. I put the rear vanes in fast position for beans and the power consumption was not much worse than the factory setup.