The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I am having trouble with the tail gate not opening after bale has tied. The gate will try and lift but one side (left) will not unlock. If you jerk the baler hard enough it will unlock and then lift normally. I also discovered that sometimes if you turn the pto off and wait about 10 seconds it would unlock. But at the end of last season even that didn't work. It works perfect when empty. Everything else works as it should. I am wondering if something might be plugging the hydraulic line going to the problem side, or maybe seals gone in cylinder. I plan on getting it in the shop next week. I would appreciate any advice on what else to look for.
Thanks
 
1 - 1 of 1 Posts
Top