The Combine Forum banner
1 - 2 of 2 Posts

72 Posts
Discussion Starter · #1 ·
Have a vibration in the rotor on a '99 8780.
With the machine running at full power, empty.
You can't feel it at lower rotor rpm's.
But turn the rotor rpm switch to high, you can feel the machine shake.
Has anybody had this trouble before?
How much trouble is it to take the rotor out of the machine?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.