The Combine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
We are a Drago dealer in Indiana and use a CR9080 on our farm. We had a 16 row demo head in stock that we were going to try, but the combine would not lift it. It had two 75mm cylinders. We could have added a 3rd cylinder, but decided not too. The combine will have way more than enough power for a non-chopping 16 row but will need to do some modifications to the combine if they do not offer a heavier lift package for the 2010 machines. We were told they were, but cannot say for sure.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top