The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I've got a JD 9600 that refuses to start on the grounds of a 035E error flashing on the display. I understand this to be a Rack Position Voltage High, but i'm wondering if anyone can point me in the direction of which rack and an idea of how to neutral the position of said rack.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
Well, after a frustrating day, a way around this error that we found is to wire from the exposed post on the Fuel Injector to the Battery's +12v. This is enough to get it started and after it's started, the combine didn't have a problem with it anymore. Probably not the safest way to do it if there was genuinely a problem with the injector, however all indications were that it was a false error or was simply invalid.
After the combine was started, just remove the 12 volts and it should be ready to go and shouldn't have any problem starting without this trick in the future.
 
1 - 2 of 2 Posts
Top