The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
My9500 is blowing the o-ring in the back plate of the rwd unit. Replaced one last fall on left side. It ran approx. 20 hours and blew again. Replaced again with new back plate and it ran < one day. The one on the right side also blowed. Anyone have any ideas? Thinking too much pressure? The filter has 110 engine and 70 sep hours.
 

·
Registered
Joined
·
76 Posts
Be sure your not engaging the four wheel drive switch at anything above 3 mph. Our experience shows it will arc the plate and blow o-ring. Pressure hits it to fast with faster speeds. If it has blowed o-ring, it usually arcs the plate so you will have to get new ones.
 
1 - 2 of 2 Posts
Top