Joined
·
3 Posts
Where can I get a chip for a 1990 9600. Is there anything else I should do when installing one of these? Thanks
9600 chip
Join the discussion
Recommended Reading
-
Separator to cover for 9670
John DeereHi I'm new to this so bear with me. My 9670 separator cover is wor beside the return inlet. Just wondering if anyone has removed it and how. Does it come out the front or the back?- 4
- 175
-
Farmer Scotty · updated
-
Joystick on 6R
John DeereAnyone else having issues with the grapple switch on the joystick for loader ? This is the second one in 2 years, the switch won’t make contact on the grapple control. Both times it’s been the open function that quits first. And of course you can’t buy just the switch anymore, you have to buy...- 1
- 33
-
9600 Electrics
John DeereI have an issue with the unload auger staying out and also some times the reel will go up but won’t come down again . You can turn the header off and on again. Then everything seems to work fine for a while . Anyone have any ideas ?- 6
- 291
-
640fd
John DeereHad the opportunity to demo a 735fd this fall and was very impressed. Was wondering about the older models of the 600fd. Any good or spend the big $?- 9
- 724
-
8820 combine
John DeereMy 8820 with 230 front has issue with ;when button to engage front is switched on ,the front doesnt respond at normal speed (only starts after a few seconds and then not very fast)- 5
- 261
-
Keith H · updated
Join now to ask and comment!