9600 specs
1 - 7 of 7 Posts
Joined
·
11 Posts
Joined
·
1,979 Posts
About the same as a 2188.
Joined
·
1 Posts
I just bought a 1999 9600. can anyone tell me the problems they had if any. or what to watch for. had a 8820 before this 9600. thanks
Joined
·
2,095 Posts
If it's an early series, check your rear wheel bearings annually... they had a habit of occasionally falling off. Not that much different than your old one really... just bigger. If you are over 3,000 hrs I would change the circuit breakers and solenoids back beside the battery.
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
2630 display vs 4640 display in S670
John DeereConsidering purchasing 4640 display with auto track as opposed to activating auto track on the 2630 display. Any experience using 4640 display on combine?- 3
- 293
-
Pattison foam lake
John DeereFirst dealership closes of the winter ? Saw this on twitter any reason this location is closing? I thought foam lake was a pretty strong farming area- 10
- 963
-
John Deere 9500 Combine
John DeereWe have a John Deere Combine 9500. from 1996. What is the problem when you switch to to half engine speed nothing happens? it only work on idle and full speed.- 2
- 251
-
Jens Haslund-Thomsen · updated
-
9860STS engine won’t rev over 270RPM
John DeereI have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.- 1
- 154
-
9860STS engine won’t rev over 270RPM
John DeereI have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.- 0
- 86
Join now to ask and comment!