The Combine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
653 Posts
Are they full cobs or pieces of cob. You may be over threshing and your pushing them through your concave. Or they are over threshed and falling through walkers and coming off your shaker pan.

If they are whole cobs, and they are piling on your sieves. Your beater grate may have fallin off the concave, or you have your chopper moved forward without having backstop installed. I have seen this done with milo stalks.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
Figured it out the husk and the cob were not getting ground up by the cylinder and allowing them to overwhelm the walkes, spilling out the front of the walkers onto the pre cleaner and the sieve. Adjusted the concave and cylinder and no more problem.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top