The Combine Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,611 Posts
If you search, there is quite a list of wear parts on this forum. If the combine is local to you, that is a good thing. I'm guessing a used wheat machine, which is much better than a corn belt special.

Walker bearing blocks (change to wood), all five grain unload, return elevator, plastic guide blocks for belt tensioner bolts, feeder house floor, grain tank floor, horizontal returns auger, horizontal clean grain auger (under shoe) and there are lots more.

Almost every part needs to be inspected, especially if it moves material or material rubs against it. You don't know how many bushels or harvest conditions.

Its a good machine that is easily rebuildable for that many hours again. I would recommend reading all posts here for 9XXX walker machines. You will never be able to learn more cheaper.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top