The Combine Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
480 Posts
Discussion Starter #1
Would very much like to put the smaller steering wheel off a 60 or 70 series combine on my 9610s all the #s of the related parts look to be the same both have 36 tooth spline shafts.Has anybody done this or have any information that might help.
 

·
Registered
Joined
·
7 Posts
Sure can. I put a 9610 wheel on a 60 series (coulda been a 50 series, it was a few years ago) because the guy wanted the bigger one. Go figure.
I just used a harmonic balancer puller, they came right off.

305
 

·
Registered
Joined
·
480 Posts
Discussion Starter #3
Great thanks,do all the other parts like the center piece change over with new wheel.
 

·
Registered
Joined
·
480 Posts
Discussion Starter #5
Was very dry at start but got some timely rains and crops have recovered to average but are 2 weeks late.
 
1 - 5 of 5 Posts
Top