[kevlar]

I'm finding my tractor is slow lifting my 8810 air seeder with just one fan running. This morning I was using both fans and it lifted it fine, seems to work better when under more load. What can I doo to speed it up? there are no flow control levers other than the one to adjust the fan speed.

 

[philonthefarm]

if you look on the back of the spool bank under the tin , look in and up from where the grease bank is near the articulation joint , youll see that you can adjust them all with a flow controll,

 

[scott]

Pivot tractor hard to the right, look rearward on l/h side of frame you will see valve assy, with a flash light and screw driver you can turn spools for full flow, I think counter clockwise for full flow, could be wrong might be clockwise, Scott.