The Combine Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
After cutting all day long with no problem I change fields and cut for 15 min then the header shuts off, it came back on and ran for less than 2 min shutting off again never to come back on. What's my issue please?
 

·
Ooohhh Deere
Joined
·
1,942 Posts
Maybe your seat switch or you have broken wires on your electric clutch. You can bridge the seat switch to isolate that at the black plug on the floor. Then you need to test light at your clutch. Could even be a failed armrest circuit board. There are a few possibilities.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top