9760 STS & 8020 video
1 - 2 of 2 Posts
Joined
·
254 Posts
Good video, he got the header stopped up at the end, pushing it to hard for the camera I guess. LOL.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Estes XPR
John DeereAnyone using these in just wheat? Dad saw an ad for these and is excited. They say folks are getting 3500 sep hrs of wear out of them and way less losses. I tend to be a skeptic. We farm in the foothills of the Simco mountains and our soils are all volcanic. We've been test operators of...- 1
- 70
-
wavesofgrain · updated
-
Pattison foam lake
John DeereFirst dealership closes of the winter ? Saw this on twitter any reason this location is closing? I thought foam lake was a pretty strong farming area- 13
- 2K
-
KXE10163
John DeereHi Can anyone tell me if these vanes are used in the discharge beatter area . I am having trouble with a S670 throwing more material out the Right hand side and was wondering if these would help even the distribution of material out. Thanks- 0
- 62
-
9860STS engine won’t rev over 270RPM
John DeereI have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.- 7
- 363
-
D635 header height control
John DeereWe have 3 D635 and have always had lots of header height ground following issues. We have done lots of calibrations and changed sensors. Someitmes they work but for the most part we have to run manually. Any one have any solutions? We are thinking of trying headsight header height control.- 0
- 62
Join now to ask and comment!