I have a new 9770 with a 2600 display serial number 17*** it did fine on recording data till we told it to switch from coverage on the display to yield ,,,when we went to the next field it stopped recording everything ,,,the command center said it was recording but we downloaded card there was nothing there,,,Stellar support tried evrything they knew to do and still no record ,,,we put out 2600 serial number 14*** and everything worked as needed but we are scared to change from coverage to yield ,,,,,we have two farmers in the area with the same problem
Make sure its not set for a varitey locator. One of my customers had this problem. His planter was not recording right so the combine could not fine a crop. I know its sounds funny but double check all your set up screens also.
Considering purchasing 4640 display with auto track as opposed to activating auto track on the 2630 display. Any experience using 4640 display on combine?
We have a John Deere Combine 9500. from 1996.
What is the problem when you switch to to half engine speed nothing happens? it only work on idle and full speed.
I have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.
I have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.
A forum community dedicated to all combine owners and enthusiasts. Come join the discussion about specifications, accessories, troubleshooting, maintenance, and more!
