The Combine Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
175 Posts
Discussion Starter #1
Here some shots of an Amadas peanut combine, based on a JD 9650 with the high output engine option.





A shot of the cylinder.





A look inside the rear.
 

·
Super Moderator
Joined
·
5,952 Posts
Interesting... I'm confused right now though...

This thing harvests the entire peanut, /w shell, right? Any pics of what the raw peanuts look like, in the tank?

What is that thing in the back, at the top with the "fingers"? and are those little roto-disks on the bottom?

Any pics from the cab?
 

·
Registered
Joined
·
578 Posts
the thing with the fingers is a cylinder, simular to what is in a conventional combine. a peanut has several of these im not real familiar with an amadus, but im sure it has 5-6 maybe. they have separation tines on them, simular to what is on a drag harrow or someting. the little disks are stemmer saws. aver the peanut is removed from the vine it will usually have a little stem left on the peanut and these will remove the stem from the peanut shell. the peanuts are left in the shell untill they reach the processor/mill
 

·
Registered
Joined
·
322 Posts
Nice videos. Since I started seeing your pics a few years ago I really want some red dirt...
 
1 - 9 of 9 Posts
Top