The Combine Forum banner

accelerator roll gears

2143 Views 8 Replies 6 Participants Last post by  rolf
Does anyone know if the newer, wider tooth accelerator roll timing gears will fit the older machines? Mine are starting to show quite a bit of lash and might as well upgrade if the newer ones will fit.
1 - 1 of 9 Posts
Yes they will fit and last longer. Also always replace both if you lose a tooth on one because you will be replacing the other one in a few days. I have had way to many guys try to replace the broken one only and then think they have a problem when the other one goes a couple days later.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.