The Combine Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Purchased an 06 mdl 2388 w/o YM. I know of two options, buy OEM thru CaseIH and have installed. I have the Pro600 display in an 08 tractor that I could use if compatable. Option #2, local coop sells and services the AgLeader Insight system with good tech support after the sale. Tech support from local CaseIH dealer is not as good.
 

·
Registered
Joined
·
3,334 Posts
case has good tech support threw there 1-800-caseafs

i think priceing will give you the answer... that can get pretty expensive..
 

·
Registered
Joined
·
560 Posts
you say that the 2388 does not have y/m. Does it not have the sensors at all, or is it just missing the monitor? If it's just missing the monitor, then it's a no-brainer to use the Pro 600. If it's missing the entire package, then it's probably 6 of one and a half-dozen of the other. I'd go with the Pro 600 if it were me, because you're already familiar with setting it up, etc. And honestly there's not that much that can go wrong with a yield monitor. Of all the precision farming systems on equipment, it's about the most straightforward. (That would hold true for both CIH and AL systems, BTW.)
 
1 - 4 of 4 Posts
Top