Joined
·
99 Posts
who is running a air foil sive in there combines and how do you like it?
air foil chaffer
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
8240 issues
Case IHHad our 8240 for 5 seasons now and have had our fair share of issues with the thing. Wanted to get an idea from others if we're an outlier or if this is standard with Case combines? We ran CRs previously. 2200 engine 1600 rotor Overheating hydro issues first season Feeder house drive shaft bad...- 13
- 797
-
Flagship concaves with Gordon bars
Case IHI’ve got a (new to me) 9120 and looking at some concave/ bar options. Mostly wheat,oat,canola,beans but biggest concern would be wheat. I like the helical concave idea and kinda narrowed it down to Loewen or sunnybrook. Also has anyone been running Gordon bars in flagship with helical concave...- 3
- 119
-
Low coolant temperature reading 8230
Case IHOur 8230, Iveco engine tier 2 started showng low coolant temperature 47c we are sure the engine is at correct operating temp. Coolant level spot on. Any experience about ? Is it crook sensor or wiring issue- 1
- 145
-
Looking to purchase a Case 500HD
Case IHLooking at a 2013 Case 500, triples and single 57gpm pump. Any tips / watch outs for that tractor ? We have a stx 450 and it’s been good (qsx15 powered) pulling 62 shanks with paired row openers on our drill. Could we pull 70 shanks with the 500 (Iveco 12.9L powered)? Tractor has one nose weight...- 5
- 400
-
1010 Reel sag
Case IHAnyone ever had problems with a 1010 reel on a 16 series case header (1644 in this instance)? Left hand side of the reel will drop but the right will not, left hand side is a slave cylinder with oil supplied by the right hand ram, new seals have been put in both rams but still only the left hand...- 9
- 183
Join now to ask and comment!