[Daniel Stahl]

How do you check the ASP sensors on a CR9080
Seem to get the rocks through on the left side, none on the right side
have the sensitivity set to 90% still seems to miss the rocks
tried setting the sensitivity to 100% does not help either

 

[bob123]

Maybe take off the feeder drive belt and hit the floor with a hammer? Will need to be running

 

[Daniel Stahl]

Maybe take off the feeder drive belt and hit the floor with a hammer? Will need to be running

that's what i'm thinking on doing too.

 

[bob123]

Weird that something would be wrong with no codes. The asp has a separate self test that runs periodically while the seperator is on. How high is your rock drum set and are the hold down springs still there?

 

[Daniel Stahl]

Weird that something would be wrong with no codes. The asp has a separate self test that runs periodically while the seperator is on. How high is your rock drum set and are the hold down springs still there?

Rock drum is set to 2. its right down there
Hold down springs are on there

 

[Daniel Stahl]

I was wondering if there is a special voltage or something that the sensors should be