The Combine Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Keen on using my background in GIS and data management to help out fellow farmers, especially with the ever increasing expectation on good record keeping.

I'd really appreciate if you Aussie farmers could take 26 seconds out of your time to fill out a survey on mapping technology to help me guide my business idea!

Cheers guys!

https://www.surveymonkey.com/s/Y77GW6Z
 

·
Super Moderator
Joined
·
5,168 Posts
Good survey!

Keen on using my background in GIS and data management to help out fellow farmers, especially with the ever increasing expectation on good record keeping.

I'd really appreciate if you Aussie farmers could take 26 seconds out of your time to fill out a survey on mapping technology to help me guide my business idea!

Cheers guys!

https://www.surveymonkey.com/s/Y77GW6Z
Not done!;)

Now I realize I'm a slow reader but 26 seconds to give an accurate answer to those questions?:eek:
I didn't fill it out as I see you are pregidous ;), and from your business standpoint you need to be, but good survey nonetheless.:)

Any chance of seeing the results though, it should extrapolate well to a NA result?
 

·
Registered
Joined
·
2,295 Posts
I would be too. Involved with an Ag Canada project looking at using mapping capabilities as well. We went looking for producers with 3 yrs of saved data and had a really hard time finding them. While Stats Can tell us something like 15 % of the producers have GIS capabilities, I'd estimate that fewer than 3% are actually using the yield maps etc. for anything more than coffee shop bragging rights. I don't personally have any equipment that new or expensive, but it seems like an incredible waste of technological capabilities.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top