Joined
·
2 Posts
I have an 04 8010 with nearly 2000 sep. hours, took oil samples out of the pto gear box and they had a high amount of copper in it. wondering if anyone had an opinion or have had this problem? thanks
bad oil samples
Join the discussion
Recommended Reading
-
8240 issues
Case IHHad our 8240 for 5 seasons now and have had our fair share of issues with the thing. Wanted to get an idea from others if we're an outlier or if this is standard with Case combines? We ran CRs previously. 2200 engine 1600 rotor Overheating hydro issues first season Feeder house drive shaft bad...- 8
- 422
-
header height cont
Case IHwhat potentiometer part number is correct for a older 1020 header on a 2166. We were sent a 127360A2. Its not working. The prev owner said the combine was working with his header. Our header was working correct on a 1440, but we were told we needed a different potentiometer for the 2166. someone...- 3
- 202
-
Grain leaking
Case IHHas anyone with a 7240 got issues with grain leaking on top of gearbox underneath the shaker table? Looks like it is coming from the corners of the feederhouse where it is attached to the machine. The flap on the shaker table seems to be fine. I was going to put some foamtape in the corners of...- 3
- 394
-
2166 unload auger won't extend
Case IHFilled up with beans now unload auger wouldn't extend. Checked fuse panel and unloader, reel, & header control share same fuse #10. Turned rotor & header on, nothing. Idled machine up to 1700 & everything working now. Haven't had this before. What do you think, bad conection in fues box where...- 5
- 176
-
murdock butler · updated
-
Pivot Spout on Case IH 1660
Case IHIn December I will add pictures and a recipe. The installation is Not yet field tested. There will be NO kit. This unit was custom engineered by a local company whose engineer said it was not that difficult. If you have a newer series machine, I know nothing about them, so bug your Case...- 6
- 629
Join now to ask and comment!