The Combine Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
233 Posts
Discussion Starter · #1 ·
Hello all , I was down at the docks in Melbourne Australia yesterday an I saw 8 pretty yellow machines come off the boat , interesting they were badge 9070 not 8090 an they were Belgium build for sure as they have a grey leaf on the back panel not the blue one, I also notice that the machine seem narrower at the wheel base it was 3.7meter wide it had the 800/70r38 with the hubs turn in
Knowing my 9090 grand island build they are 4.3 with hubs turn out

My question is are the Belgium build machines narrower then grand island due to the width issues you guys have in Europe
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top