The Combine Forum banner

41 - 49 of 49 Posts

·
Super Moderator
Joined
·
2,645 Posts
Apparently they need installed in sets of 8, they just happen to be packaged that way as well. Balance reasons.
Wide bodies tend to have the most wear in the middle.
 

·
Registered
Joined
·
3,925 Posts
Do they come with the upgraded hardware kits too like the Redekop's?

The rotor's are perfectly opposing and you could change out sets of 2 forever. Not sure what would be different now. Should be able to go half way across with brand x and the other half brand y.
 

·
Super Moderator
Joined
·
2,645 Posts
Do they come with the upgraded hardware kits too like the Redekop's?

The rotor's are perfectly opposing and you could change out sets of 2 forever. Not sure what would be different now. Should be able tyo go half way across with brand x and the other half brand y.
No hardware.
Don’t know why my Claas tech suggested 8 at a time.
 

·
Registered
Joined
·
2,513 Posts
No hardware.
Don’t know why my Claas tech suggested 8 at a time.
If you install new ones on the very outside across from each other they want you to put new ones in the same spot on the other side of the rotor. Then it’s balanced front to back side to side
 
41 - 49 of 49 Posts
Top