The grain combine is 200hp in 89 and 90, then it went to 215hp from 91 to 97, it has a Nippondenso injection pump and has the 7.6 in it. The corn combine is 235hp and has the 7.6 in it and has a Bosch injection pump in it from 89 to 97. The 9510 came out with the 8.1, the grain was 220hp and corn 240hp.
Can anyone tell me if these vanes are used in the discharge beatter area . I am having trouble with a S670 throwing more material out the Right hand side and was wondering if these would help even the distribution of material out. Thanks
I have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.
We have 3 D635 and have always had lots of header height ground following issues. We have done lots of calibrations and changed sensors. Someitmes they work but for the most part we have to run manually. Any one have any solutions? We are thinking of trying headsight header height control.