The Combine Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
469 Posts
Discussion Starter · #5 ·
More height is what I want, just like the new ones.
Was considering those concerns you mentioned, also knife angle would change some. Just wondering if anyone else had come up with something creative, other than buying an M series of course. That would solve all the current problems, but also create one different bigger one, not machine related.;)
 

·
Registered
Joined
·
1,125 Posts
Have 9 bolt pattern rims on our 2940 Macdon swather. Trying to get a little more room for a 30' canola swath. Have 21.5 X 16.1 tires.
Anybody found anything else that will work.
I replaced some of the same size with 600/50R22.5 tires. 560/60R22.5 would be closer in width. You only gain a couple inches though. Just an option if you want similar flotation at a better price.

Here is a picture that compares them.

 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top