The Combine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Just purchased a NH SP200 with a 16' disc head. will cut alfalfa, oats, and sorghum for myself and pick up a few acres on the side time permitting. Any advice on what works for you when running a machine like this would be greatly appreciated. Also where is a good place to hook up a chain when I get stuck? again... Any of you weld a bracket on the machine? Thanks in advance for the help!
 

·
Registered
Joined
·
366 Posts
an aggressive pitch angle can give a very clean finish and let you put a lot of material through in a hurry at the same time. this is also a ******* way to level gopher holes and dull knives simultaneously, so not the solution for every field :)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top