The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
New to Bourgault. When doing a rate calibration I was targeting wheat at 120lbs and book told me transmission setting of 34. did the calibration and got 80lbs. Did the formula in the book and got a new trans setting of 49 and got 170lbs. Did a 3rd calcualtion and got a trans of 42 which got me near my target of 120lbs.
Is this normal to have such a high and low rate to get a medium of my target rate. Also Bourgault guy was their and he said this is normal.
 

·
Registered
Joined
·
44 Posts
Yea that's normal, you are going to love this tank. If you have the 591 you don't have to do any calculation it will do it for in the calibration mode, enter weight and your done. Write that setting number down and next year set it to that number, check it and it will be bang on again.
 
1 - 2 of 2 Posts
Top