Can a RT be installed ?
Join the discussion
Recommended Reading
-
1010 Reel sag
Case IHAnyone ever had problems with a 1010 reel on a 16 series case header (1644 in this instance)? Left hand side of the reel will drop but the right will not, left hand side is a slave cylinder with oil supplied by the right hand ram, new seals have been put in both rams but still only the left hand...- 0
- 0
-
Looking to purchase a Case 500HD
Case IHLooking at a 2013 Case 500, triples and single 57gpm pump. Any tips / watch outs for that tractor ? We have a stx 450 and it’s been good (qsx15 powered) pulling 62 shanks with paired row openers on our drill. Could we pull 70 shanks with the 500 (Iveco 12.9L powered)? Tractor has one nose weight...- 3
- 59
-
CASE-IH 1660- Concave adjustment ratchet lever-anything better??
Case IHAnyone found anything better then the factory ratchet lever for the concave adjustment? Mine has always been very hard to flip the direction lever on, works better for a little while if you blow it out and lube it up good, but it never works decent for very long. A new one is $143.00, which I...- 2
- 185
-
6140 xflow cleaning
Case IHI need advice for a new combine (no hill only flat land).. actually have a 2388. Are the bushing in the midrange 140 serie combine with the new Xflow cleaning system really beefed up ? Is the Xflow cleaning system reliable or it's better to stay with the old fashionned cleaning system with...- 2
- 341
-
Canola settings 8230 flagship
Case IHG’day all after some settings for haversting windrowed canola. Crop yield is around 2.5T to the ha. With reasonable grain weight. Current settings are. Concaves large, small, slot, slot. Rotor speed 580. Fan speed 650, pre sieve 2, upper 10 lower 8. Can’t seem to get the capacity out of the...- 7
- 507
-
Sam Badger · updated
Join now to ask and comment!