The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
117 Posts
try shifting the rotor in the back with the leverthat`s under the pto belt it sometimes siezes and you think you`ve shifted when you have`nt this lever can be taken off and loosened up with a torch heating. if your `88 is an 03 and newer this problem is common. try this before pulling the rotor gearbox
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top