The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Does anyone have pictures of the electrical installation of Case 2166 combine?
I need to find out which wire goes to the back axle.
I really need your help as soon as possible.
 

·
Registered
Joined
·
90 Posts
If you are looking for the wire that goes to the mudhog valve, it is a single wire sticking out of the loom by the engine drain hose at about eye level.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Torque, by my combine this wire has no electrical current. When I connect it with accumulator, it works. I wonder exactly which button in the drivers cabin launches the electrical current to the mudhog valve. There is one button but it's connected to 5 wires that seem to be the same.
Do you have any idea how to solve my problem?
 

·
Registered
Joined
·
90 Posts
Power goes from the cab fan fuse (the one that runs all the time) to the 3rd gear lockout switch and then the mudhog switch. The wire from the mudhog switch to the rear is marked #541 on the wire.
 
1 - 6 of 6 Posts
Top