The Combine Forum banner

Claas 670 Settings

2763 Views 5 Replies 4 Participants Last post by  Don Boles
Just wondering what people are using for settings on the 670. Seem to be getting to much for returns. Mainly thinking for canola around 8 percent moisture. Thanks.
1 - 1 of 6 Posts
Run the cylinder as fast as possible without grain damage.
The APS and cylinder setup is the same as the hybrids and a higher speed can greatly reduce a plugged APS and/or cylinder.
I've seen 700 sometimes.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.