The Combine Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter #1
Can the trough under the clean grain auger on a 2188 be replaced from underneath or do you have to remove the sieves and do it from the inside?
 

·
Registered
Joined
·
154 Posts
I don't know for sure on the clean grain trough, but the return trough has to be done from the inside. I would guess them to be the same. all of the bolts have to be held from the inside.
 

·
Registered
Joined
·
22 Posts
I have replaced the clean grain trough on a 2388 from under the combine. I suspect the 2188 clean grain trough is no different.
 

·
Registered
Joined
·
30 Posts
We changed the clean grain trough on our 2188 last year from underneath. We took out the bolts that are toward the back of the combine then let the trough hang down. Then you can reach up inside and get to the back side of the front ones.
 
1 - 5 of 5 Posts
Top