The Combine Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 · (Edited)
Selling a complete CIH/NH Trimble guidance system taken from a T8.390. We already have 2 kits for other CNH equipment so we move those between machines when required. Kit is all virtually new!

- Pro 700 / Intelliview 4 display with mount interface.
- Trimble CNH NAV II Controller (Version 3.93)
- Trimble CNH AG 372 Antenna & mounting plate (Version 3 FW)

  • HPXP & RTK unlocked
  • has around 12 months of global RTX CentrePoint & RangePoint subscription remaining.
If you have an CIH AFS/NH PLM ready machine this kit will get you up and running. Useable on any supported CNH equipment - screen will need programming from a T8 to whatever vehicle type required (dealership does this for us when we move display from combine to tillage tractor annually).


Will get some photos up asap, any questions drop me a PM or email [email protected].


After $9000 which is approaching half the cost from a dealership! :)
Happy to ship worldwide.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Ok the screen has now sold elsewhere so I have remaining the NAV & GPS units.

Would ideally like to sell them as a kit, looking for around $6500 USD / £4100 GBP / €5100 EUR shipped.

Contact details for offers or questions listed in original post.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top