Milky from water or aerated by the orrifice?
Ant....
Ant....
Contaminated hydraulic oil
Hi
We have a 2011 5088 with 2050 header. The fore and aft ram on the lefthand side has always crept out. We have taken it off and they say the oil is contaminated with water and scored the ram. The oil at the ram does look creamy but the oil in the reservoir still looks clear.
If there had been water in the ram when it was manufactured is it possible that the contamination is confined to that circuit after 300 hours, not something which is altered much in work.
We have a 2011 5088 with 2050 header. The fore and aft ram on the lefthand side has always crept out. We have taken it off and they say the oil is contaminated with water and scored the ram. The oil at the ram does look creamy but the oil in the reservoir still looks clear.
If there had been water in the ram when it was manufactured is it possible that the contamination is confined to that circuit after 300 hours, not something which is altered much in work.
1 - 1 of 5 Posts
1 - 1 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Combine Forum
A forum community dedicated to all combine owners and enthusiasts. Come join the discussion about specifications, accessories, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
