The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
First year with a cr and I am having trouble getting a clean sample. I have pieces of straw and partially thrashed heads in the sample. Have the rotors at top speed and the concave tight. I have 2 of the four filler plates in, should I use all four? I am picking up 30ft of swath.
 

·
Registered
Joined
·
56 Posts
Doing lovitt wheat my settings are rotors 1220,fan 860,concaves 1/4,all 4 filler plates in,top sieve 3/8,bottom sieve 3/16 ground speed around 4-4.5 lots of straw yielding around 55bpa.
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #3 ·
Thanks I will try that. Where do you set your sensitivity at on the sieves and rotors?
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #5 ·
Thanks for the information! How high up in the funnel do you usually try to run at in wheat and canola? Thanks again!
 

·
Registered
Joined
·
56 Posts
Not very far up, usually keep it low in the narrow part of the funnel. Maybe 1/4 of the way up at the most for both wheat and canola.
 
1 - 6 of 6 Posts
Top