The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Does anyone know how to hook up to BOTH eyelets at rear of frame to pull out of mud, since chopper is lower than eyelets, and is the in way of chain when pulling from both.
 

·
Registered
Joined
·
125 Posts
I wont recommend it But I always hook up to the lower axle pinholes, works if you have the axle on the higher ones. and you need a slip hook
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #3 ·
Owners manual says to use both frame eyelets , not to pull on axle. But chopper is too low and will get bent up by chain when hooked to both eyelets. Only way I can figure is to use two pull tractors, one on each eyelet.
 
1 - 3 of 3 Posts
Top