The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Cutting wheat that is about 3 weeks past its best so the straw is very brittle and breaking up very easily. I need as much straw from the crop as possible so is there anything I can do to reduce the smashing of the straw.
I've got the concave open all the way and am running the rotors at 1200rpm, any less and I don't get the output.
Any quick tips to reduce this.
 

·
Premium Member
Joined
·
5,770 Posts
TRs have cover plates that could go over the beater grate. not sure if you can get this on a CR but you could probably just sheet it in. That would help
 
1 - 2 of 2 Posts
Top