The Combine Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
319 Posts
Discussion Starter · #1 ·
Hi all.
I have a Valentini 7.7mt folding rotary hoe. Over the last three years I have cracked the rotor shaft 3 times replacing it with new rotors each time. It cracks right near the plate to bolt the blades on where it is welded. I doubt it's the manufactures fault as there are other units around which have had no problems. So what am I doing wrong. I don't have stablising wheels which I'm installing now. I am pulling it with a 8360R which usually is working flat out using it at 6/6.5km/h in firm dirt.
I am up for any suggestions to help me sort it out.
Thanks.
 
1 - 1 of 1 Posts
Top